• This was designed so that frequency characteristics of 5.75~41.75MHz reverse and 54~864MHz forward are excellent. The level

    deviation was minimized between channels.
• By selecting exclusive Hybrid IC per band, large output and multi-channel transmission are possible. Especially, safety of reverse

    signals is greatly excellent.
• Because the sides are all-in-one heatproof plates, heatproof effect is excellent.
• The case is aluminum and so strong. Also, it is coated with film and printed, the appearance is pretty.
• Transmission frequency bands were reverse owing to the change of inside diplex filters. Change possibility into bands of 5.75~65㎒

    reverse and 88~864㎒ forward
• By selecting guaranteed SMPS, since low exothermic condition of 11W power consumption is maintained, causes of life decrease

    and breakdown occurrence due to high heating can be removed.

• Since 5/8-24 pin type connectors are directly linked, access to 7C, 10C, and 12C cables can be possible.

• By selecting Hybrid IC of large output (second stage forward and first stage reverse), it was designed to output maximum 115㏈㎶

    forward.
• Designed into Plug In (way of PAD) of gain control and slope control
• From designing input and output connectors into F and FT forms, convenience of users were contributed.
• In the future, due to frequency changes reverse and forward, the way of Plug In was chosen in order to be able to change band

    separators.
• Design to drastically change from AC43 to 90V (input option specifications)
• With side all-in-one exothermic plates, exothermic effect is excellent. When signal levels are amended on spots, the doors can be

    opened and closed briefly.